I have a very slow Internet connection (5 Mbps down, and even less for upload). Given that, I always download movies at 720p, since they have low file size, which means I can download them more quickly. Also, I don’t notice much of a difference between 1080p and 720p. As for 4K, because I don’t have a screen that can display 4K, I consider it to be one of the biggest disk space wasters.
Am I the only one who has this opinion?
deleted by creator
When the remux is 30gb and the 1080 encode is 23gb ✈️🏢🏢
Nah, for stuff I plan to watch on my bedroom projector especially, I don’t bother with quality that will drive up the file size.
I don’t care what quality the things I’m downloading are so long as the file size is small enough. There are very few acceptions to that rule. Biggest one is if someone tried to edit shows using AI to enhance them by upping the resolution. Had one series I was so looking forward to watching after a long time torrenting that I had to delete because you could easily tell an AI (or someone who doesn’t have a clue what they’re doing) tried enhancing the resolution and made it unwatchable for me.
Edit: Damn, reread and I wish I could get 5mbps in the apartment complex I’m in! I’d be lucky if my download speeds spiked to 1mbps. All this with what is supposed to be the best ISP in the area, which is also an absolutely shitty company (xfinity).
I’m totally fine with something like 540p or 480p, although I guess that’s because my preference is good ol’ TV shows that aired in the 90s or 00s over TV cable, so I’m fine with SDTV quality. And honestly, there’s not much sense in downloading all seasons of, say, Ally McBeal in 4K when you can download 8 full glorious 90s shows with their entire seasons in SDTV in the same space.
Even with “modern” stuff, I’ve seldom found a movie or TV show post 2012 that merits anything higher than 720p. I don’t get why don’t movie codecs get a multi-res options so that for example you can get the action scenes in 1080p, even 60fps if you want, but the melancholic scenes and the quiet drama scenes and the credits in 480p. Would save lots of space without losing quality where it matters.
I tend to notice the drop in quality in more slow scenes since there is more time to notice it. Though very action heavy scenes do suffer if the encode is bad. It would be really nice if we did see more shit in 60fps though. I understand what lots of “but 24fps is more ‘cinematic’” mean for some kinds of shots/movies. But after being so adjusted to 60fps and higher (even if shit is interpolated due to having had a “120Hrz” TV since like 09), shit is much much cleaner. The “soap opera effect” is a real thing, but it kind of just stops being an issue after you get used to it and see the benefits of clarity and smoothness. And it is much more like how seeing shit in real life.
I have been having a real hard time going back to watch movies and especially animated media. Like a panning shot in an anime just looks so damn jittery. It completely takes me out of the thing I am watching as it can make me feel a weird kind of nauseous. Lots of regular movies and shows also do this. Some of it might be due to some stuff that was shot in early digital making it worse. But it does happen with stuff shot on film too.
Just really sucks that the industries seem to go out of their way to make it hard for studios/film makers to try weird shit now that we have it. Like I would love to have the 44fps version of The Hobbit since I missed being able to see it in theatres. But the home releases are all set to traditional speeds. It isn’t a limitation of the Blu-rays themselves from what I understand. But the players tend to only allow 24/30fps for playback. Though I would love to be wrong about that. But still just artificial shit stopping potential advancements (or at least fun efforts to try shit). Those Spiderverse movies being done in layers of different fps rates is an example of trying some weird shit that was dope.
I feel ya. I very rarely replace my devices and the internet speeds suck where I live anyway, so 720p is my go-to.
In my brain 720 is standard and 1080 is fancy, until I watch something at a friend’s house and sometimes it looks so good it’s unsettling
Only when the artifacts in 4k look bad - like black squares on a black background due to compression. 1080p in that case is preferable.
After like 5-10 years of ripping 4K Blu-rays without re-encoding, I just can’t go back. The only time I’ll go back to anything less is if the source material was shot in it.
I prefer the opposite. I want the best quality I can get often 4K remux. Storage is cheap nowadays and I don’t mind waiting a fee days for a movie to download. Also I do have a 500/500 connection which helps.
I prefer 1080p but if not available then 720p is perfectly fine as well. 4k is overkill and I don’t even have a monitor that could play it at native resolution. Where I do prefer “lower quality” though is framerate. I don’t like how 60fps looks so I force YouTube to play videos at 24fps.
It really depends on the media and my level of interest in it. I was only bothering to try and get 1080p copies of stuff I liked due to only having a 1080p TV for so long. But I did make efforts to get 1080 where possible (and based on my drives at the time) even before I had a HD TV and the only thing I had to actually watch that resolution on was my laptop. And that was because I wanted to make sure I had (at the time) the best copies of torrented encodes of stuff I really loved and would want to look good later. But I got a 4K HDR TV a few months ago as my 13yo 1080p TV started just giving black screens on all inputs. And while a lot of things are fine, the limitations of the encodes are showing much more.
If I am just checking out something that I have heard about or was told to check out by a friend. I might just grab a 1080 or even 720 copy since they are often the top seeded results. Then go back and find 4k copies if I really get into it. Though my main issue today is similar to back when I was using my laptop. Storage space. I started ripping my Blu-rays and I am the worst about dealing with compression stuff. So I really really need to get on making that media server I have been “meaning to build” for years. Get some 18TB or 20TB drives and RAID the shit out of them for redundancy. lol.
I usually watch youtube (well via Freetube) on 480, maybe 720 when I am paying attention and 360 when I am laying down. I prefer these small file sizes because I can skip left and right in the video time with the arrow buttons like the file is local and not online. I haven’t pirated a movie in years (I would not want to watch anything new) but I download a lot of old racing from the 80s and 90s and it is already 480p, so as long as it is in english, not black/white I am happy.
If it is a cartoon, or even anime, I don’t mind between 720p and 1080p in most cases, but that is just about that.
Nope. Most of my stuff is 720p because I won’t be watching it again. My library has significantly dwindled in size. Only my absolute favorites are stored in high quality. Everything else is SD and quite a bit has been deleted.
Let’s be honest, most stuff is shit and forgettable / not watching again. They are just remakes of readaptations of sequels. You know that by the time you want to watch it again, there will be a remake just as bad.
Dealing out the harsh truths I see!
I have to ration disk space and internet here is typically not amazing
You don’t really prefer a lower resolution, you just work within the limitations you have.
Also, I don’t notice much of a difference between 1080p and 720p
Either your display is really shitty or you need (better) glasses. This isn’t like the difference between 60 and 144hz where its barely visible for untrained eyes.
Completely true, but also compression can make anything bad. I’ve seen 480p better 1080p simply because the 480p was using more bitrate, where the 1080p is encoded without enough relatively speaking.
