I’m not in the least bit surprised, most of these bastards aren’t willing to live by the same rules they impose on everyone else.

Yeah that’s what made me think of this… before you go indoctrinating children against their will (and the will of the parents), maybe you should become better role-models first.

Who says he’s going to BED at 8pm? That’s ridiculous and not even vaguely implied here. Get a grip.

So now you’re just projecting what you think his schedule is? Just because he doesn’t want to have events scheduled at all hours of the night doesn’t mean he actually goes to bed at 8pm and doesn’t wake up until 11am. Any normal person needs time to eat dinner, time to unwind before going to bed. Hell I start unwinding around 7pm but don’t go to sleep until almost midnight. Maybe you’re just one of their weird people who requires zero sleep but the rest of the planet actually takes time to relax so they can get some decent sleep and be up early again the next day.

What was I thinking? Oh that’s the problem, I was thinking…

Obviously it’s time we started!

Is this supposed to be a bad thing? Honestly I don’t want the guy holding the nuclear launch codes to be making decisions on a few hours of sleep, no matter what your age is.

Since our politics cannot hold one religion above another, I say we have a scoreboard for every religion with a final board listing how good or evil each politician rates overall.

I was kinda thinking the same thing… Since we can’t trust the various networks to be equally honest about both parties, maybe we could do something on lemmy similar to how reddit does livestream news feeds, except we put the scoreboard on the side and let participants vote on new additions for each delegate.

Scoreboards have buzzers, lets make it obvious every time they ‘score’ a new sin!

So you mean all of the things that are legal for Biden to now do thanks to SCOTUS? 😆

Wouldn’t that just trigger the “thou shalt not lie” commandment? We’re not their god, we can punish them with immediate judgement.

Kinda like dealing with Microsoft Office… You can’t find anything in that “new” toolbar design because so many options are grouped together in ways that don’t make any sense. I’m so glad I never had to actually use that garbage even though I did enjoy the older versions.

It’s been a long time since I used Windows myself, however one of the big reasons for switching was the inherent instability. At once point I was developing code in Visual Studio and constantly loading/closing quite a few different programs to test things out. Windows just didn’t seem to handle memory-recovery and I would have to reboot every week or two (usually because of the whole OS locking up). In comparison, I run a variety of software on my linux machines which can involve anything from testing code in multiple browsers to image editing to 3D CAD drawings. Sure that tends to drain the memory but when I close something I get that memory back. I’ll frequently get down to the last 100K of RAM, close a couple programs that may be holding large caches (Firefox really hates me having hundreds of open tabs), and then I’m right back up and running again. Reboots may occur about every 6 months.

I have to support other people using Windows at work, which reminds me how much I’ll never go back to it. My biggest frustration is that Microsoft is constantly changing things. Hell you can’t even directly reach the control panel any more, you have to run searches to find the specific item you want. Want to check the settings of a certain printer? Good luck, that doesn’t seem to be available in the right-click menu any more. It’s just all these idiotic changes making it difficult to actually use or maintain Windows. Why should I have to google how to find something when everything used to be under the control panel or a right-click away?

It may not be a hazard in your area, but around here there’s about a million bicyclists who have no objection to riding out into the middle of the road in front of fast-moving traffic to go around parked vehicles. Also that parked vehicle could be someone changing a flat tire and walking around their vehicle, or present some other type of hazard. You don’t know why they are parked there, and if you’re driving at night you might not even see them until it’s too late. Obviously other people in your area want to know about these parked cars or they wouldn’t be reporting them.

If you want less information, why not switch to Google maps or OsmAnd?

Yes, that must be it! Wait a minute… isn’t that Trump’s line?

Then how come the NYT doesn’t equally cover the much more frequent recorded ramblings of Trump? Sure Biden has had some problems. Hell I frequently find myself rambling when speaking in front of a crowd and have to pull myself back on track and I’m nowhere near Biden’s age. However Trump does it pretty much at every single rally or other event he speaks at, so where’s the equal coverage of all these incidents? Where’s the calls to have Trump step down as mentally unfit and too old for office? It may not be fake news, but it is most certainly and overwhelmingly one-sided news.

Guess that makes me king of my own domain! 😆

Yeah you don’t want the arm TOO tight or you just create another friction issue. I generally find if you have a very consistent under-extrusion then it’s likely the E-steps, but if the issue seems more random (some layers are great, only certain corners are bad, etc) that it comes down to friction somewhere in the line. Good luck!

Note that the brass toothed gear can also wear out. Maybe check it to see if there’s a lot of ground-up filament in the teeth? Then check the fitting where the bowden tube goes into the extruder, make sure that isn’t loose (it will be seen moving back and forth during retractions in a print). Also worth checking the bowden tube itself, make sure it’s not causing a lot of drag on the filament passing through it. And for that PTFE mod in the hotend, check the friction there, it’s possible to over-tighten the fitting and partially crush that tubing. You should be able to easily push filament through the hotend by hand once it is up to temp.

I assume you have something other than the stock setup for your filament roll to reduce the drag there so it’s not being pulled into the extruder at a 90-degree angle? There are a number of extension arms you can print to change the angle, but the best methods are either to move the filament spool off to the side (where the filament can enter the extruder in a straight line), or print a roller that uses a bearing for changing the angle in combination with a full bearing-supported roller that the filament spool itself sits on. I still have mine in the stock position on top of the frame but with the combination of bearing objects in the last option I have practically zero friction pulling the filament into the extruder.

Finally, when was the last time you calibrated your E-steps? It’s likely you actually have underextrusion on all layers, but they’re getting smoothed over and are not as obvious on the alternate layers. Never hurts to check this step.

tl;dr: eliminate all friction from the spool to the hotend, calibrate E-steps.